HX8121N ONT

2GE+1VOIP+1USB

WiFi :802.11N 2.4G 300Mbps

To deliver triple-play services to the subscriber in Fiber-to-the-Home or Fiber-to-the-Premises application, the HX8142C xPON ONT incorporates interoperability, key customers’ specific requirements and cost-efficiency.

Equipped with ITU-T G.984 compliant 2.5G Downstream and 1.25G Upstream GPON interface, the GPON ONT supports the full of services including voice ,video, and high speed internet access.Compliant with standard OMCI definition  Standard,HX8142C GPON ONT is manageable at remote side and supports the full range FCAPS functions including supervision, monitoring and maintenance.

This series of products complies with IEEE 802.3ah (EPON) and G.98x international standards (GPON), has good interoperability and operability, and can achieve interconnection and interoperability with OLT equipment from mainstream manufacturers in the industry.

ONU adopts EPON/GPON compatible chip solution. It can meet the different networking requirements of FTTH network construction, and provide users with a variety of rich, safe and efficient services.

Services

Data

The HX8121N ONT is delivered with 2GE interface, supporting:

  • Auto-negotiation and MDI/MDIX auto-sensing
  • Built-in layer-2 switch
  • Advanced data features such as VLAN tag manipulation, classification, and filtering
  • Built-in layer-3 routing and residential gateway
  • 2.4GHz 300Mbps WLAN interface
  • USB x 1

Video

The HX8121N ONT supports video contents delivered in the form of data (by multicast or unicast).

 Voice

The HX8121N ONT can optionally be delivered with two POTS interface port for carrier-grade voice services,

supporting:

  • Multiple voice codec
  • Echo Cancelling, VAD, CNG
  • Supporting static or dynamic jitter buffer
  • Various CLASS services – Caller ID, Call Waiting, Call Forwarding, Call Transfer, etc.SIP (RFC3261)
  • MEGACO v2 (H.248)

To enable VoIP access, the HX8121N ONT also supports interfacing external IAD box or Home Router with voice capability through the Ethernet Interface.

WiFi

  • 2.4G 300Mbps
  • 802.11 b/g/n
  • External Antennas

Power Supply

  • 12V 1A (feed via external AC/DC adapter)
  • 2-PIN power adaptor input
  • Dying Gasp support

GPON Interface

  • Compliant with ITU-T G.984 GPON standards
  • BoSA on board optical solution
  • 244Gbps Burst Mode Upstream Transmitter
  • 488 Gbps Downstream Receiver
  • Compliant with ITU-T G.984.2 Amd1, Class B+
  • Wavelengths: US 1310nm, DS 1490nm
  • Multiple T-CONTs per device
  • Multiple GEM Ports per device
  • Flexible mapping between GEM Ports and T-CONT
  • Activation with automatic discovered SN and password in conformance with ITU-T G.984.3
  • AES-128 Decryption with key generation and switching
  • FEC (Forward Error Correction)in both directions
  • DBA reporting by piggyback reports in the DBRu (mode 0and mode 1)
  • Mapping of GEM Ports into a T-CONT with priority queues based scheduling
  • Support Multicast GEM portand incidental broadcast GEM port.

Ethernet Interface

  • 2GE
  • Ethernet port auto negotiation or manual configuration
  • MDI/MDIX automatically sense
  • Virtual switch based on 802.1QVLAN
  • VLAN tagging/detagging per Ethernet port

OAM

  • Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.988
  • Alarming and performance monitoring
  • Remotely software image download over OMCI, as well as activation and rebooting
  • Hold two software sets with software image integrity checking and automatic rollback

Specification

Optical SPEC Working wavelength nm PON：TX1310，RX1490;
The light emitting power dBm 1~ +4(GPON)-1 ~ 4 (EPON)
The light receiving sensitivity dBm  ≥ -28
Optical fiber connector / PON：SC/UPCOr SC/APC
Port The user side Ethernet ports / 2GE
USB / 1
POTS / 1
WiFi 2.4G WiFi / 300Mbps
5G WiFi / —
Other The power supply V/A AV110～255V→DC12V 1A
Work temperature ℃ -5～40